|
Login
|
|
|
|
|
|
|
Categories
|
|
|
|
|
|
|
|
|
|
|
| Part Number |
| - DN8000K10PCI |
| Condition |
| - Used |
| Quantity |
| - 1 |
| Description |
| DN8000K10PCI
Virtex4 Based
ASIC Prototyping Engine
The DN8000K10PCI is a complete logic emulation system that enables ASIC or IP designers a vehicle to prototype logic and memory designs for a fraction of the cost of existing solutions. The DN8000K10PCI is hosted in a 32-bit or 64-bit PCI slot (33/66MHz) or can be used stand-alone. A single DN8000K10PCI configured with 2 4VLX200s and a single 4VFX100 can emulate up to 3.7 million gates of logic as measured by LSI. And this number does not include the embedded memories and multipliers/ALUs resident in each FPGA. The DN8000K10PCI achieves high gate density and allows for fast target clock frequencies by utilizing FPGAs from Xilinx's Virtex-4 LX/FX families for logic and memory. High I/O-count, 1513-pin, flip-chip BGA packages (for LX) and 1152-pin BGAs (for FX) are employed, providing for abundant, fixed interconnect between the FPGAs. All FPGA interconnect is single-ended or differential, with differential clocked at 350MHz+. In addition, the OSERDES/ISERDES functionality is thoroughly tested and characterized, allowing for 10x pin multiplying on differential pairs between FPGAs and dramatically easing the partitioning problem. The industry's highest performance PCI Bridge, the QL5064, enables data transfer via master-moding and chaining, without making any resource demands on the Virtex-4 FPGAs. Two, DDR2 SDRAM SODIMM are provided, allowing for up to 8GB of DDR2 memory. Each socket is tested at 200MHz, and reference designs are provided. A total of 284+ test pins are provided on the top of the PWB via two 200-pin expansion headers. These expansion headers can also be used for logic analyzer-based debugging or for pattern generator stimulus. The DNPMC104 card can be mounted to any of these connectors, enabling an interface to A/Ds, D/As, and a host of other embedded system peripherals. Also, custom daughter cards can be mounted to these connectors as a means to interface the DN8000K10PCI to application-specific circuits. Two XFP modules can be used to support OC-192/STM-64, 10 Gigabit Ethernet, 10 Gigabit Fibre Channel, and G.709 data streams and can be connected to routers, switches and network cards. Reference material such as DDR2 SDRAM controllers and PowerPC code is included (in Verilog, VHDL, C) at no additional cost. |
|
|
|
Please leave us your email and we will contact you ASAP
|
|
|
|
|
Other DN8000K10PCI items
|
|
|
|
|
|
|
|
|
|